Clam's ice auger conversion kit allows an angler to use an 18 volt cordless drill as the power to drill your holes. Extremely lightweight & portable it has changed ice fishing forever. Patents pending. NEW for 2015 is the ability to use your drill without taking the chuck off. Same great results as the original design but more user friendly. Results will vary depending on drill used. Recommend using high torque 18 volt lithium battery powered drills.
Features twin serrated stainless steel lazer blades, power point center blade tufflite Dupont Zytel® handle. System* LT-296 transmission with heat treated gears. 2.0 H.P. Tecumseh 2 cycle engine air cooled 170 RPM auger rotation at full load 65 ft. lbs. Auger torque 25:1 gear ratio and powder coated paint.
$114.99 - $194.99
The Replacement Auger Cutting Heads work with The hand and power augers. These heads feature a one piece design instead of individual blades, offering a stronger over all cutting surface. The cutting heads are constructed of high chromium steel, which is more durable than other brands of auger blades and will stay sharper much longer.
New premium 2-cycle smokeless synthetic bled engine oil with fuel stabilizer. For use with all brands of 2-cycle ice drills.
Chrome-Alloy Swedish Stainless Steel Blades for Lazer Hand Augers. Includes four blade screws and two blades.
Ion 8" Replacement Blades. Straight Through? Blades for the ION Electric High Performance ice auger. Fits 8" model.
Make adding and removing your ice auger cover a snap. The design features two hinged halves that are snugged together by a durable band. To remove the cover, simply hold the auger upright and apply pressure on one-half with your foot. When you are done drilling holes, simply align the blades and snap the cover back into place.
Our power auger extensions gain drilling depth in thick ice conditions. This extension is fully-welded steel and includes our Eskimo® red powder-coat paint finish, which is proven to be the most durable in the industry. Mounting hardware included.
Eskimo hand auger replacement blades.
Convert your hand auger into a power auger using only a cordless drill. Works with Hand Augers Strikemaster/Mora, Strikemaster/ Laser and Eskimo & Polar. Cuts through 10 inches of ice in about10 seconds Works with any 3/8" or 1/2"cordless drill.
Orange Safety Cap (Blade Cover)
Made with durable 600D Polyester Oxford fabric, the ION battery bag is the ideal storage location for your batteries when not in-use on your unit. Inner wall mesh pockets allow for the placement of hand warmers which will assist you in keeping your batteries warm in the coldest of conditions. Batteries not included. c
Includes: Jiffy? 2 Cycle Smokeless Oil with Fuel Stabilizer, Jiffy 2500 & 3500 Series and 2HP or 3HP Tecumseh engine. Spark Plug for all Tecumseh? engines and spark plug wrench.
Protects fingers while the reversible Diamond Honed Tungsten Carbide blade keeps a razor edge on your auger blades. The bright orange finger guard makes is easy to find on the ice too! Will not rust and can be cleaned with soap and water or washed in a dishwasher.
$8.39 - $9.49
For the 4-cycle PRO4 & 4G ice augers, Gives you the exact amount needed for use, Specifically formulated for use in small engine applications, 6 oz. bottle
The primary purpose of Tank Warmer is to sustain the warmth within the tank, similar to a coffee thermos. Keeping the core of the tank warmer longer, permits greater use of the gases inside. Slide Tank Warmer sleeve over a 1-pound propane cylinder to increase the life of the tank's propane by up to 35 percent. Save fuel and money while powering heaters, lanterns and other ice fishing gear. For maximum runtime, use in direct sunlight to activate solar absorption materials, or slide hand warmer between sleeve and tank.
$6.49 - $7.99
6013-0160: For Jiffy 2500 & 3500 Series and 2Hp Tecumseh engines.
For 2 or 3 horsepower engines.
Keep your Eskimo engine running at peak performance with this blend of specially formulated 0W-40 oil, designed for all 4-cycle, air-cooled engines. This oil holds up out on the ice, providing reliable cold-weather performance and superior wear protection for optimal engine performance.
4-cycle 0W-20 Synthetic oil 3.4 oz. - for use with 4- cycle engines.
Specifically blended for ice auger and all other air cooled 2-cycle engines. Safer for the environment and operator because it reduces polluting smoke. Mixed ratio is 40:1. Includes fuel stabilizer. 3.20 ounces.
Page 1 of 1