Marine Lubricants & Access
Formulated for use in snowmobiles and other oil injection cold weather equipment requiring ashless TC-W3 oil. Exceeds Category IV low temperature performance requirements (-40°F).
Johnson/Evinrude XD50 2-Cycle Oil Gallon
$10.49 - $77.88
Ideal for outboards and stern drives. Quart bottle.
This new synthetic blend oil was developed specifically for the greater demands of DFI outboard engines. Higher operating temperatures combined with reduced oiling rates have put increased demands on the lubricants.
Quickly extract up to 5 quarts of oil from boats. Durable construction and no power or batteries required. Change the oil through the engine dipstick tube. Tank has locking handle, relief valve, and cap for the hose.
Tru Fuel 40:1 2Cycle Pre-Blend 32oz
Tru Fuel 50:1 2Cycle Pre-Blend 32oz
Specifically formulated with a higher concentration marine additive package to meet the needs of high horse power outboard, including direct fuel injected engines. Clean burning and reduces carbon build - up in exhaust system. Reduces smoke.
$6.99 - $54.99
Ashless dispersant oil that provides excellent lubrication for all horsepower outboards and other 2-cycle water or air-cooled engines. Exclusive formula designed to help maintain peak engine performance, helps fight rust, reduces smoke, and controls deposits that rob engine of acceleration and power. Meets all requirements of leading manufacturers that specify the use of NMMA (National Marine Manufacturers Association) TC-WII (two cycle water cooled), TC-W3, or API (American Petroleum Institute) TC (low ash) oils in either premix or oil-injected 2-cycle applications. Multiuse, TC-W3 certified. Provides protection down to -13 degrees Fahrenheit.
$13.49 - $48.99
Newly formulated to provide the highest level of performance and protection available today. Recommended for use in Mercury's newest engine, the Verado. For use in all 4 - stroke engines.
$7.99 - $44.99
Formulated from ultra-clean base stock oil to provide superior protection against piston scuffing, bearing wear, spark plug fouling, pre-ignition and rust. Has outstanding lubricity and miscibility for better mixing of fuel and oil, resulting in a cleaner running engine. Contains no phosphorus.
Small, versatile gun. Barrel takes 3 oz. grease cartridge or can be suction loaded. Includes push lock plunger, die cast T-handle that locks in place for loading, 5 1/2" straight grease pipe, standard-duty coupler and 3 oz. cartridge of LubriMatic Marine Corrosion Control & Trailer Wheel Bearing Grease.
$11.49 - $30.99
Extra corrosion protection and fuel system cleaning: Keeps fuel fresh, prevents gum and varnish; Prevents corrosion from moisture and ethanol-induced water attraction; Cleans fuel injectors and intake valves to improve engine performance. Both come in bottle with measurement container.
Engineered for Mercury Mercruiser stern drives and provides increased protection for outboard lower units.
Improved emulsifiers to help protect gears should water enter the gear housing. Improved oil film adhesion to gears and internal components. For all Force, Mariner, Mercury and MerCruiser and most other brands of outboards and stern drives except OMC electric shift models.
$5.39 - $19.49
Fuel stabilizer keeps fuel fresh for quick, easy starts after storage, while prolonging engine life. Removes water to prevent corrosion and cleans carburetors and fuel injectors. Protects engine from gum, varnish rust, and corrosion.
Lucas Synthetic Blend 2-Cycle Marine oil has been specifically formulated to address the performance requirements of water cooled 2-cycle outboards and personal watercraft. Our product is fortified with our unique Lucas additive chemistry and an ashless detergent inhibitor package to minimize spark plug fouling, pre-ignition, and ring sticking. Mix ratio is 50:1 and is recommended for use in pre-mix or direct injection systems. NMMA TC-W3® certified (RL-13125P)
Fits standard quart plastic bottles. Ideal for adding fluids to marine lower units. Flexible hose gets hard-to-reach fill plugs. Complete with metal threaded filler fitting.
$12.49 - $12.99
Quicksilver's all new 4-stroke oil technology outperforms automotive oils in marine applications due to its specialized additive package design. The new mineral 4-stroke oil is also now approved for use in all outboard engines. 10W30 is recommended for certain operating temerpatures and manual start applications
SEA FOAM Motor Treatment is a petroleum based product that helps clean internal fuel and oil system components. SEA FOAM is an EPA-registered product, and will not harm engine components, seals, gaskets, catalytic converters or oxygen sensors. SEA FOAM helps liquefy gum and varnish deposits helping to quiet noisy valve lifters. By using SEA FOAM to help eliminate varnish and deposit buildup, mechanics can more accurately diagnose mechanical problems that may exist. That is why Sea Foam has been so popular with professional mechanics for over 65 years.
Quicksilver premium gear lube is an exclusive formulation engineered to provide excellent lubrication and corrosion protection to lower unit gears in high or low horsepower engines under varying operating conditions. Contains tackifiers to improve oil film adhesion to gears and internal components. Additives protect gears from metal to metal contact and excessive wear. Engineered specifically for outboard lower units. For use in gear housings of all outboards.
A powerful blend of oils and additives that contain no SOLVENTS. Designed to increase power and fuel mileage and also lower exhaust emissions through a more complete combustion.
$7.79 - $10.49
Lucas Marine Grease is a premium, extreme pressure, multi-purpose, heavy duty OBCS grease containing unique polymers, anti-wear agents and tackifiers with inherent rust and oxidation resistance to provide the highest performance properties. It has been designed to lubricate under the most severe operating conditions in marine applications and because of its adhesive properties, it effectively stays in place.
Prevents Ethanol fuel related damage in vehicles and small engines, Prevents corrosion damage and helps remove water, Stabilizes fuel to keep it fresh during storage, Cleans fuel system for improved in-season performance, For use at every fill up for optimal protection, Use at every fill up
$7.59 - $8.09
Water-insoluble formula. Excellent corrosion protection from saltwater, salt air and atmospheric chemicals. Use on winches, wheel bearings, swivel hinges, pins & anchor chain reels.
Lucas Oil Fishing Reel Oil is a special blend of oil and additives specifically designed to lubricate all moving parts in fresh and salt water fishing reels. It penetrates into tight spaces to lubricate small high speed bearings and between tight surfaces. It provides rust and corrosion protection even under the most adverse conditions. Also works great on folding knives. It comes packaged in a 1 ounce bottle with a precision needle applicator for one-drop applications allowing you to put just the right amount of lubricant into hard to reach areas.
Fill or change your lower unit oil with ease. Attach the pump to your lower drain hole, screw the cap onto any 32 oz. lower unit bottle and pump to fill. Fits most outboard motors.
Page 1 of 2 Next page