Filter By:

  • Show More Brands
  • Show Fewer Brands

Slings, Swivels, Belts

Magpul ? Tejas Gun Belt
$80.70
El Original is the first belt in the Tejas Gun Belt line by Magpul. Crafted from a combination of inch-and-a-half wide top grade bullhide leather and reinforced polymer, it's strong and water resistant, rigid enough to carry a holster, but still comfortable for everyday use. Proudly made in Texas, it's not just a great gun belt it's a great belt. U.S.A. Made in Texas
No Image
$75.95
Quickly reconfigurable between one-point and two-point operation, the Magpul® MS4 QDM Sling enhances the proven MS4 Dual QD Sling Gen2 by including factory-installed Magpul QDM quick-disconnect swivels. As a heavy-duty replacement for the typical push-button swivel, the Magpul QDM offers an innovative low-profile design, single-handed manipulation, a superior corrosion-resistant Melonite®finish, and a high-strength, freely rotating bale that canalizes sling webbing to prevent rollover. This sling system not only provides the strength, speed and security of Magpul QDM hardware, but also maintains compatibility with the standard QD sling cup interface found on many handguards, lower receivers, receiver end plates and buttstocks. The Magpul MS4 QDM Sling is made in the U.S.A. and is fully Berry Amendment compliant.
No Image
$71.20
The Magpul® MS1 QDM Sling further enhances one of the most versatile line of rifle slings by including factory-installed Magpul QDM quickdisconnect swivels. As a heavy-duty replacement for the typical pushbutton swivel, the Magpul QDM offers an innovative low-profile design, singlehanded manipulation, a superior corrosion-resistant Melonite® finish, anda high-strength, freely rotating bale that canalizes sling webbing to preventrollover. This sling system not only provides the strength, speed and securityof Magpul QDM hardware, but is also optimized for dedicated two-pointsling functionality built around the streamlined MS1 Slider. TheMagpul MS1 QDM Sling retains all of the original MS1 functionality andis fully adaptable for one-point applications with a series of adapters (soldseparately) based on the MS3® and MS4® Slings. The Magpul MS1 QDM Sling is made in the U.S.A. and is fully Berry Amendment compliant.
Magpul MS1® Padded Sling
$56.95
The MS1 Padded Sling is an optimized, dedicated two-point sling that serves equally well in a one-point role when using optional adapters. Built around our MS1 slider, this system provides rapid adjustments to either lengthen or shorten the sling with no slipping once set, and no tails, loops, or other potential snag hazards. In a two-point role, the MS1 allows easy shoulder transitions, rapid adjustability for hands free rifle carry and shooting support from various positions. The MS1 system also has a series of adapters that are sold separately and based on the MS3® and MS4? slings. By adding the appropriate adapter (available with Paraclip? or QD Sling Swivel) for the sling, you can easily add one-point functionality to your MS1.
Magpul MS4® Dual QD Sling GEN2
$56.95
Filling the same mission requirement as the standard MS3 Sling, the MS4 can quickly switch between one-point and two-point configuration. The MS4 maintains material construction and specifications identical to that of the standard MS3, but instead of Magpul Paraclips? it features two heavy-duty push-button QD Sling Swivels along with a custom steel connection ring to allow one to two-point convertibility. This modification allows compatibility with QD sling cups commonly found on lower receivers, receiver end plates, buttstocks, and many low-profile forward QD Sling Mounts. The MS4 Dual QD GEN2 incorporates a new low profile quick-adjust Slider which minimizes bulk and allows for secure, yet effortless, sling adjustment. Webbing length has also been increased for a comfortable fit with all body types and armor configurations. Made in U.S.A. and 100% Berry Amendment compliant.
Magpul MS3® Single QD Sling GEN2
$55.05
Filling the same mission requirement as the standard MS3 Sling, the MS3 Single QD can quickly switch between one-point and two-point configuration. The MS3 Single QD maintains material construction and specifications identical to that of the standard MS3, but features a heavy-duty push-button QD Sling Swivel for the one-point (rear) weapon attachment rather than the Magpul Paraclip?. This modification allows compatibility with QD sling cups commonly found on lower receivers, receiver end plates, and buttstocks. The MS3 Single QD GEN2 incorporates a new low profile quick-adjust Slider which minimizes bulk and allows for secure, yet effortless, sling adjustment. Webbing length has also been increased for a comfortable fit with all body types and armor configurations. Made in U.S.A. and 100% Berry Amendment compliant.
Magpul MS3® Sling GEN2
$47.45
Driven by the operational experience of Magpul instructors, the MS3 Multi-Mission Sling System was designed to give a versatile weapon-retention solution for a multitude of tactical environments and missions. As a standalone product, the rapidly-convertible MS3 allows an operator to levera ge the maneuverability of one-point attachment for direct action, or two-point attachment for stability. Single-hand adjustments and quick-release, positive-locking hardware provide flexibility and durability in a truly adaptable sling system. Used in conjunction with the optional Magpul ASAP® plate, the MS3 enables seamless transitions into an array of shooting positions without getting bound or fouled. The MS3 concept allows switching from Weapon Shoulder to Reaction Shoulder for shooting around corners, under vehicles, or to minimize exposure. Made in U.S.A. and 100% Berry Amendment compliant.
No Image
$39.99
The RSA provides a low profile forward sling attachment point for the Magpul MS2 or MS3 and other clip-in systems. Made from nitro carburized steel for wear and corrosion resistance, the RSA attaches to any 1913 Picatinny rail and has been proven to withstand stress tests of over 300 pounds while only weighing a mere 1.3 ounces.
Magpul MS1® Sling
$33.20
The MS1 Sling is the most versatile addition to the Magpul® line of rifle slings. This sling system starts as an optimized, dedicated two-point sling that serves equally well in a one-point role when using optional adapters. Built around our MS1 slider, this system provides rapid adjustments to either lengthen or shorten the sling with no slipping once set, and no tails, loops, or other potential snag hazards. In a two-point role, the MS1 allows easy shoulder transitions, rapid adjustability for hands free rifle carry and shooting support from various positions. The MS1 system also has a series of adapters that are sold separately and based on the MS3® and MS4? slings. By adding the appropriate adapter (available with Paraclip? or QD Sling Swivel) for the sling, you can easily add one-point functionality to your MS1. The MS1 Sling is made entirely in the USA, and is fully Berry Amendment compliant.
Magpul ASAP® Ambidextrous Sling Attachment Point
$28.45
The ASAP Ambidextrous Sling Attachment Point allows a range of motion greater than 180 degrees, enabling true ambidextrous weapon manipulation for both left and right handed shooters. The ASAP replaces the standard AR15/M4 carbine stock receiver end plate, providing a tactical advantage by minimizing sling snagging and facilitating easy transition to and from weapon and reaction side shoulders. The ASAP works with one-point type slings with snap hook style attachments such as the Magpul MS3. Made from precision cast black manganese phosphatized steel, the ASAP is compatible with both mil-spec and commercial-spec carbine receiver extensions (buffer tubes). The ASAP has been proven to withstand stress tests of over 300lbs. Made in U.S.A.
Magpul RSA® - Rail Sling Attachment
$28.45
The RSA provides a low profile forward sling attachment point for the Magpul MS2 or MS3 and other clip-in systems. Made from nitrocarburized steel for wear and corrosion resistance, the RSA attaches to any 1913 Picatinny rail and has been proven to withstand stress tests of over 300 pounds while only weighing a mere 1.3 ounces. Made in USA.
Magpul QDM - Quick Disconnect Swivel
$26.55
The Magpul QDM is a heavy-duty upgrade to standard push-button quick detach sling swivels. The innovative design allows for a lower profile sling swivel that offers one-handed manipulation, a high strength bale that rotates freely and canalizes sling webbing to prevent rollover, and superior resistance to corrosion with a Melonite finish. Made in USA.
Magpul MSA® - MOE® Sling Attachment
$23.70
The MSA (MOE Sling Attachment) attaches directly to the MOE Hand Guard, providing a forward sling attachment point for the Magpul MS3 and other clip-in sling systems. Like the RSA the MSA is precision cast steel, and is Melonite finished for wear and corrosion resistance. Made in USA
Magpul MS1® MS3-QD? Adapter
$19.90
Combine with the MS1 Sling and Paraclip? to provide two to one-point convertibility. Manganese-phosphate finished steel and reinforced polymer hardware with custom snag-free high durability 1-1/4" webbing. Made in U.S.A.
Magpul M-LOK® Paraclip? Sling Mount
$18.95
The M-LOK Paraclip Sling Mount is a steel clip-in sling mount for M-LOK compatible systems. It is constructed of high-grade, precision cast steel and has an extremely durable Melonite finish. With a low-profile and snag-free design it fits a wide range of clips, including the Magpul Paraclip. Made in U.S.A.
Magpul M-LOK® QD Sling Mount
$18.95
The M-LOK QD Sling Mount provides a forward attachment point for the Magpul MS4 Sling and other push-button QD slings. Machined from Mil-Spec anodized aluminum, the low-profile M-LOK QD Sling Mount features beveled edges to reduce snagging and has an anti-rotation design that prevents swivels from spinning.All hardware necessary for attachment directly to M-LOK Slots is included and and no modifications to the M-LOK hand guard or forend is required. Made in U.S.A.
No Image
$18.95
The SGA Receiver Sling Mount is a connection point for the Mossberg 500/590/590A1 SGA Shotgun Stock and one-point clip-in style attachments such as the MS3 Paraclip?, the HK® hook, ITW? MASH hook, and others. Made from precision cast steel that is Melonite® treated for wear and corrosion resistance. Dedicated fit for the Magpul SGA Stock, the Receiver Sling Mount can be installed on either the left or right side of the front of the stock. Made in USA.
Magpul Sling Mount Kit ? TYPE 2
$18.95
While both the UBR® and STR® come with TYPE 1 push-button QD swivel sockets pre-installed on the left side of the stock, this Sling Mount Kit TYPE 2 can be installed on the opposite side to add additional push-button QD Sling Swivels or our own Magpul® QDM. Additionally, for running ambidextrous sling swivels on the SGA®, MOE® Rifle, MOE® Fixed Carbine, MOE® AK, Zhukov-S, Hunter 700, and Hunter X-22 Stocks, this TYPE 2 Kit must be utilized in conjunction with the optional TYPE 1 Kit. Heavy-duty black phosphatized steel construction easily installs with the UBR or STR's original hardware, or with the hardware included with the TYPE 1 Kit. Swivels not included. Made in U.S.A.
Magpul QD Paraclip? Adapter
$15.15
The QD Paraclip Adapter fits push-button QD swivel sockets to allow use with Paraclips and other clip-in sling attachments. Made from precision-cast Melonite finished steel. Made in U.S.A.
Magpul QD Sling Swivel
$14.20
Push-button quick-detach sling swivel for 1-1/4" webbing, compatible with QD sling attachment points. Manganese-phosphate finished steel. Combine with MS1 Sling for dedicated two-point sling, or with MS1 MS4 Adapter for two to one-point convertible sling. Made in U.S.A.
Magpul Paraclip?
$9.45
Clip-style sling attachment point for 1-1/4" webbing. Lockable, Melonite finished steel and reinforced polymer hardware. Compatible with ASAP Plate, RSA, MSA, SGA Receiver Sling Mount, and many other clip-in sling attachment points*. Combine with the MS1 Sling for a dedicated two-point sling, or with MS1 MS3 Adapter or MS1 MS3-QD Adapter for a two to one-point convertible sling. Made in U.S.A.
Page 1 of 1