Searching...
 
 
Location & Directions (218) 386-2590
Store Hours: Monday-Saturday 9:00 a.m. - 7:00 p.m.; Sunday 11:00 a.m. - 4:00 p.m.
 
 
 
 
 
> Shooting Sports > Optics > Scope bases > Leupold > QRW Weaver-Style Bases
 
Leupold QRW Weaver-Style Bases
  • Color | Model: Matte Black | 49836
  • Color | Model: Matte Black | 49838
  • Color | Model: Matte Black | 49841

Leupold QRW Weaver-Style Bases

Product Rating
 
3.5 stars
 (27 Reviews)
$54.99
Availability:
 

Product Details

Leupold QRW Weaver-Style Bases

Leupold® Quick-Release (QRW) mounts are every bit as rugged and dependable as the Leupold optics they're intended to secure. With a huge variety of mounting systems, for nearly every type of firearm under the sun, you're sure to find the perfect match for you firearm, and your style of shooting.

 
  • Part Numbers close open

    Option Barcode Manufacturer's Part Number Vendor Number
    Matte Black / 170029 030317008024 170029 BRS-0603-2300
    Matte Black / 171707 030317012830 171707 BRS-0603-2210
    Matte Black / 174313 030317017996 174313 BRS-0603-2299
    Matte Black / 49836 030317498368 49836 BRS-0603-1789
    Matte Black / 49841 030317498412 49841 BRS-0603-0392
    Back to top
  • Consumer Reviews close open

    REVIEW SNAPSHOT®

    by PowerReviews
    --- [ Replace PRoduct Name ] ---
     
    3.5 stars

    (based on 27 reviews)

    59%

    of respondents would recommend this to a friend.

    Write a Review

    Reviewed by 27 customers

    Sort by

    Displaying reviews 1-10

    Previous | Next »

     
    5.0

    I have been using Leupold bases since 1977

    By Idaho Long Ranger

    from Council, ID

    About Me

    Comments:

    The Leupold STD and Torx bases are outstanding. I recently got a new Browning X-Bolt rifle and picked up these Leupold bases. A+

    • Gift:
    • No
     
    5.0

    Quality

    By Turkey 64

    from West Columbia, SC, United States

    About Me

    Comments:

    I have put leupold mounts on more than 16 rifles, and they are without a doubt the best.

    • Gift:
    • No
     
    3.0

    rear screw on the rear base stripped out

    By WyRon

    from Casper Wy

    About Me

    Comments:

    I bought the dual dove tail base for my Winchester model 70 featherweight today from Midway USA. I installed the bases, the front base had no issue and the screws were tightened to 24in-lbs using a wheeler torque driver. When installing the rear base, front screw had no issues but the rear screw stripped out.

    • Gift:
    • No
     
    5.0

    Mounted my VX-2 2-7x33 to my .416 Rem. Mag.

    By TJY505

    from New Mexico, United States

    About Me

    Comments:

    I used these bases and appropriate rings to mount my VX-2 2-7x33 to my Winchester Model 70 Super Express chambered in .416 Rem. Mag.. They have held together well and have not come loose. Even under the brutal recoil of the .416 using 400 gr. Solids. The scope returns to an acceptable zero (within an inch @ 100 yards) on this rifle. However, the may return to complete zero on less recoiling rifle.

    • Gift:
    • No
     
    1.0

    Solid

    By Cdog

    from Ohio, United States

    About Me

    Comments:

    Would not work on my rem 700 308 bull barrel installed a bushnell elite 4500 and did not have enough elevation to hit 0 at 100 yards over 25 inches low when cross has are center

    • Gift:
    • No

    (1 of 2 customers found this review helpful)

     
    3.0

    Redesigned windage screw slot w / T-15 - Not good

    By Mitten Side

    from Michigan, United States

    About Me

    Comments:

    At first I thought it was a clever idea, in short order, however, I learned a T-15 with a near 1/16 inch slot cut through the middle of it, leaves no room for error, especially when you try to achieve the recommended torque of 45 in lbs. After mangling the T-15 pocket, on both sides – I resorted to the old standby to finish the job. To that I would say, if it's not broke don't fix it - but you broke it...so please fix it. Two (2) suggestions, and the first being my preference: 1) Lose the T-15 and widen the slot to the old design (feel free to warranty to me 2 new screws like this in silver) or; 2) lose the slot, and go to a T-25 or larger. Never together, new wine in old wineskin sort of thing. Otherwise, I found the other improvements to be good; the pre-lubed dovetail on both base and ring, and the Nylok patch on the screw threads. And I'm ok with the Leupold "L" embossed on the top of the rings. Recommend inexpensive means to mounting a scope - don't bother with the T-15 in windage screws.

    • Gift:
    • No
     
    3.0

    Redesigned windage screw slot w / T-15 - Not good

    By Mitten Side

    from Michigan, United States

    About Me

    Comments:

    At first I thought it was a clever idea, in short order, however, I learned a T-15 with a near 1/16 inch slot cut through the middle of it, leaves no room for error, especially when you try to achieve the recommended torque of 45 in lbs. After mangling the T-15 pocket, on both sides - I resorted to the old standby to finish the job. To that I would say, if it's not broke don't fix it - but you broke it...so please fix it. Two (2) suggestions, and the first being my preference: 1) Lose the T-15 and widen the slot to the old design (feel free to warranty to me 2 new screws like this in silver) or; 2) lose the slot, and go to a T-25 or larger. Never together, new wine in old wineskin sort of thing. Otherwise, I found the other improvements to be good; the pre-lubed dovetail on both base and ring, and the Nylok patch on the screw threads. And I'm ok with the Leupold "L" embossed on the top of the rings. Recommend inexpensive means to mounting a scope - don't bother with the T-15 in windage screws.

    • Gift:
    • No
     
    5.0

    Only system i will put on anything, anymore.

    By tempdoug

    from north dakota

    About Me

    Comments:

    Simple, Strong, Solid, need i say more. Just a great mount.

    • Gift:
    • No
     
    2.0

    AB3 BASES

    By No go88

    from Undisclosed

    About Me

    Comments:

    This is a FYI not necessarily a complaint for the most part I've always been satisfied with my Leupold products. So i recently purchased a NIB AB3 with DD bases along with some standard rings for another rifle. First problem the standard rings were missing two screws which was an easy fix... Second issue was when trying to install the DD bases on AB3 the mounting screws turned and went nowhere, wrong size... So returned first set got another set and SAME problem. Screws are listed as #8's but look smaller, holes in receiver look like #10's. So I don't know if Leupold or Browning has an issue.

    • Gift:
    • No
     
    5.0

    Most of the People most of the time.

    By Hammer Vn1700

    from Pasco, WA, United States

    About Me

    Comments:

    I've been using Leupold mounting systems for over 40 years and have yet to have a problem. I have mixed and matched with other brands such as Milett for certain looks and applications but I have never had a problem with any of them. After reading review after review I have come to a very old but simple conclusion. "You can please most of the people most of the time, but you can't please all of the people all of the time".. No company or product is perferct. Sooner or later we will make an imperfection. However, if one wants to be perfectly honest they would have to admit that these guys come as close to perfect as you can get. I have never had to scratch my head to figure out how to mount the mounts or rings. They make it so easy a cave man could do it. As for tech support, they have a team that is second to none. I have found that if you are one of those individuals that is confused about how to install one of their mounting systems, maybe you shouldn't own a firearm or anything with a sharp edge. Just saying. So, all that being said and after insulting a few people, I give Leupold a 10. A 5 just isn't good enough. Thank you Leupold for all the years of great product and my many many thousands of pounds of game in my freezer over the years.

    • Gift:
    • No

    Displaying reviews 1-10

    Back to top

    Previous | Next »

 
  Streiff Sporting Goods
  (218) 386-2590
HOME - Streiff Sporting Goods

About Streiff's

Fishing Catalog

Hunting & Shooting Catalog

Policies & Shipping