Leupold QRW Weaver-Style Bases

Leupold QRW Weaver-Style Bases
  • Color | Model: Matte Black | 49836
  • Color | Model: Matte Black | 49838
  • Color | Model: Matte Black | 49841
$54.99
Color:
Matte Black
Please select options

Details

Leupold® Quick-Release (QRW) mounts are every bit as rugged and dependable as the Leupold optics they're intended to secure. With a huge variety of mounting systems, for nearly every type of firearm under the sun, you're sure to find the perfect match for you firearm, and your style of shooting.

Part Numbers

Option UPC MPN
Matte Black / 170029 030317008024 170029
Matte Black / 171707 030317012830 171707
Matte Black / 174313 030317017996 174313
Matte Black / 49836 030317498368 49836
Matte Black / 49841 030317498412 49841

Reviews

Read 27 Reviews

Write a Review

REVIEW SNAPSHOT®

by PowerReviews
 
3.5

(based on 27 reviews)

59%

of respondents would recommend this to a friend.

REVIEWS

Reviewed by 27 customers

Sort by

Displaying reviews 1-10

Back to top

Previous | Next »

5

I have been using Leupold bases since 1977

By 

from Council, ID

About Me

Comments:

The Leupold STD and Torx bases are outstanding. I recently got a new Browning X-Bolt rifle and picked up these Leupold bases. A+

5

Quality

By 

from West Columbia, SC, United States

About Me

Comments:

I have put leupold mounts on more than 16 rifles, and they are without a doubt the best.

3

rear screw on the rear base stripped out

By 

from Casper Wy

About Me

Comments:

I bought the dual dove tail base for my Winchester model 70 featherweight today from Midway USA. I installed the bases, the front base had no issue and the screws were tightened to 24in-lbs using a wheeler torque driver. When installing the rear base, front screw had no issues but the rear screw stripped out.

5

Mounted my VX-2 2-7x33 to my .416 Rem. Mag.

By 

from New Mexico, United States

About Me

Comments:

I used these bases and appropriate rings to mount my VX-2 2-7x33 to my Winchester Model 70 Super Express chambered in .416 Rem. Mag.. They have held together well and have not come loose. Even under the brutal recoil of the .416 using 400 gr. Solids. The scope returns to an acceptable zero (within an inch @ 100 yards) on this rifle. However, the may return to complete zero on less recoiling rifle.

1

Solid

By 

from Ohio, United States

About Me

Comments:

Would not work on my rem 700 308 bull barrel installed a bushnell elite 4500 and did not have enough elevation to hit 0 at 100 yards over 25 inches low when cross has are center

3

Redesigned windage screw slot w / T-15 - Not good

By 

from Michigan, United States

About Me

Comments:

At first I thought it was a clever idea, in short order, however, I learned a T-15 with a near 1/16 inch slot cut through the middle of it, leaves no room for error, especially when you try to achieve the recommended torque of 45 in lbs. After mangling the T-15 pocket, on both sides – I resorted to the old standby to finish the job. To that I would say, if it's not broke don't fix it - but you broke it...so please fix it. Two (2) suggestions, and the first being my preference: 1) Lose the T-15 and widen the slot to the old design (feel free to warranty to me 2 new screws like this in silver) or; 2) lose the slot, and go to a T-25 or larger. Never together, new wine in old wineskin sort of thing. Otherwise, I found the other improvements to be good; the pre-lubed dovetail on both base and ring, and the Nylok patch on the screw threads. And I'm ok with the Leupold "L" embossed on the top of the rings. Recommend inexpensive means to mounting a scope - don't bother with the T-15 in windage screws.

3

Redesigned windage screw slot w / T-15 - Not good

By 

from Michigan, United States

About Me

Comments:

At first I thought it was a clever idea, in short order, however, I learned a T-15 with a near 1/16 inch slot cut through the middle of it, leaves no room for error, especially when you try to achieve the recommended torque of 45 in lbs. After mangling the T-15 pocket, on both sides - I resorted to the old standby to finish the job. To that I would say, if it's not broke don't fix it - but you broke it...so please fix it. Two (2) suggestions, and the first being my preference: 1) Lose the T-15 and widen the slot to the old design (feel free to warranty to me 2 new screws like this in silver) or; 2) lose the slot, and go to a T-25 or larger. Never together, new wine in old wineskin sort of thing. Otherwise, I found the other improvements to be good; the pre-lubed dovetail on both base and ring, and the Nylok patch on the screw threads. And I'm ok with the Leupold "L" embossed on the top of the rings. Recommend inexpensive means to mounting a scope - don't bother with the T-15 in windage screws.

5

Only system i will put on anything, anymore.

By 

from north dakota

About Me

Comments:

Simple, Strong, Solid, need i say more. Just a great mount.

2

AB3 BASES

By 

from Undisclosed

About Me

Comments:

This is a FYI not necessarily a complaint for the most part I've always been satisfied with my Leupold products. So i recently purchased a NIB AB3 with DD bases along with some standard rings for another rifle. First problem the standard rings were missing two screws which was an easy fix... Second issue was when trying to install the DD bases on AB3 the mounting screws turned and went nowhere, wrong size... So returned first set got another set and SAME problem. Screws are listed as #8's but look smaller, holes in receiver look like #10's. So I don't know if Leupold or Browning has an issue.

5

Most of the People most of the time.

By 

from Pasco, WA, United States

About Me

Comments:

I've been using Leupold mounting systems for over 40 years and have yet to have a problem. I have mixed and matched with other brands such as Milett for certain looks and applications but I have never had a problem with any of them. After reading review after review I have come to a very old but simple conclusion. "You can please most of the people most of the time, but you can't please all of the people all of the time".. No company or product is perferct. Sooner or later we will make an imperfection. However, if one wants to be perfectly honest they would have to admit that these guys come as close to perfect as you can get. I have never had to scratch my head to figure out how to mount the mounts or rings. They make it so easy a cave man could do it. As for tech support, they have a team that is second to none. I have found that if you are one of those individuals that is confused about how to install one of their mounting systems, maybe you shouldn't own a firearm or anything with a sharp edge. Just saying. So, all that being said and after insulting a few people, I give Leupold a 10. A 5 just isn't good enough. Thank you Leupold for all the years of great product and my many many thousands of pounds of game in my freezer over the years.

Displaying reviews 1-10

Back to top

Previous | Next »